No Windsor Button Classes this Week – 3/28 & 3/30

I will not be teaching this week on Holy Thursday or Holy Saturday, but will return the following week for what may turn out to be our last week. Hope to see you there!

Kitchener Stitch Tutorial

Today’s post is brought to you by the letter K
and by the prepositions IN and OUT.

I definitely still need to work on my production quality, not to mention my timing and delivery. But if there are ten minutes of your life that you could spend either watching paint dry or learning how to graft two knitted edges together invisibly, I highly recommend watching this video.

Video

Kitchener Stitch or Grafting – Beyond the Fear

In Knitting Without Tears, Elizabeth Zimmerman claimed that grafting or Kitchener Stitch did not count as a seam but rather magic. But almost everything I’ve ever read about how to work the Kitchener Stitch (even by EZ herself) irritates me. Why? Because they typically describe this amazingly elegant and simple concept in such complex terms with so many steps that a lot of knitters get intimidated by it and avoid it like The Plague. And those who do use it often need to keep a reference book on their lap while they do. (Some sellers of knitting notions have even apparently discovered there is a market for laminated Kitchener instruction cards and mnemonic pendants of various sorts.)

If you do not shy away from grafting but need the security of a reference tool, you still qualify as a knitting hero in my book. That was me, before I had my Aha! moment. However, the truth is that grafting is a lot easier to “see” than it is to describe in words, and once you can see it, you can do it. Independently. Consistently. Flawlessly. And even in pattern!

I am convinced that Kitchener’s problem (the stitch, I mean, not Mr. Kitchener himself) began with the fact that knitters got stuck in describing anything having to do with yarn, stitches and needles in knitting terms. Insert needle into first stitch on back needle as if to knit. Leave stitch on… But hey, people! When you are grafting, that thing in your working hand is a SEWING needle. And how does a sewing needle work? You poke the tip into a fabric, then bring the tip out of the fabric again. In, out. Two words. IN. OUT. The little section of thread left behind between those two holes is called a stitch. Let’s make that our third word: STITCH.

The essence of Kitchener Stitch is that you make a stitch into one edge to be joined, then cross over the gap and make a stitch into the other edge. You continue alternating in this fashion, drawing the edges together in the process. The only thing you need to clarify and visualize first is what counts as IN and what counts as OUT as you are making each STITCH.

Today I am only going to talk about stockinette grafting. If you never graft in pattern your whole knitting life, you will be ~oh-kay~. But the thought of any otherwise competent knitter being afraid to graft in stockinette makes me very sad. And potentially leaves a lot of open sock toes.

Hopefully you have come to understand that when you insert your knitting needle tip as if to knit, you are inserting it into the loop from the front (the surface closest to you) to the back (the surface away from you). When you insert your needle tip purlwise, you are inserting it from the back to the front. To work a basic Kitchener stitch, you go IN the last stitch you previously came out of on that side, and OUT the next stitch. (You pass through the loop of each knitting stitch twice to complete it. Once you have worked the second pass, you can move that loop off of your knitting needle.) The key to knowing which direction is IN and which is OUT comes from recognizing that the STITCH left behind is a purl bump. You want that purl bump to be left on the side of the knitted fabric that has all the other little purl bumps on it – the inside or wrong side.

So insert your needle in one stitch and out the other, and before you pull it through, notice whether it is going to leave a stitch on the knit side or the purl side. Easy to correct if you got it wrong, but before long you will do it instinctively.

The only further hitch is with the very first loop on each needle and the very last, because they don’t have a “partner” next to them. My solution is to pretend they do. Pretend there is an invisible loop before the first loop. Go IN the invisible loop and OUT the first real loop. At the end, pretend there is still another loop. Go IN the real loop and OUT the invisible loop. You’ll get it right every time.

IN and OUT to make a stitch in the loops on the back needle. IN and OUT to make a stitch in the loops on the front needle. No need for a cheat sheet to remember that!

(As I said at first, grafting is harder to describe than to visualize. Since I want to help you “see” the process, I will be posting a video tutorial.)

Moth is a 4-Letter Word

Guess what I’ve been doing today! FINALLY getting around to dealing with a m0+# attack on the shadow-knit King Tut wallhanging I made as a gift awhile back. The infested creation was first mummy-wrapped in a plastic trash bag and quarantined in my unheated mud room for many weeks, which at this time of year is almost as good as a freezer. (I have learned that freezing does not actually kill moth eggs, at least not all of them, but it does at least make them go dormant to ward off further damage.) Before I go further into the subject of moth extermination, let me satisfy your curiosity about shadow knitting and my King Tut. Here he is in a Photoshopped portrait I just made while he is recovering from the steam treatment I gave him this morning.
tut skewed enhanced
The editing was needed in order to apply perspective, or in this case remove perspective to make the image rectangular. Shadow knit images are only viewable from a vantage point that is low or to the side, making displaying photos tricky. This is because shadow knitting consists of narrow stripes of alternating colors, which are worked to create garter ridges where that color is to be visible, or stockinette valleys where that color is to be hidden. When viewed at a shallow angle, one sees the “mountaintops” of the garter ridges and not the “valleys” of the contrasting color.  It is fairly easy to do and straightforward to add simple shapes and rippling color effects to a project. But hi-res images on a large scale, like this?

Yes, it’s as crazy-making to knit as it sounds, especially because the step which determines whether a ridge or a valley is created is performed on the WRONG side of the piece, where you can’t see the image emerging at any angle.  Which – if you know me – means you will understand why I just HAD to knit it. But even if you don’t know me you will understand why I wasn’t particularly thrilled when it started getting moth-eaten.

So, how to evict the little beasties…..? The best tip I have heard is to put all your woolen items in a black trash bag and store them in your car parked in the sun on a summer’s day. Hard-boiled moth eggs, anyone? Sounds easy to do especially if you have a lot of things to de-moth. Regular shaking and brushing of your woolens helps dislodge the eggs as well. But it’s not summer and I want to get this guy taken care of. So I laid him out on a towel on my kitchen counter and closely inspected him, using an old soft tooth brush to whisk off any suspected areas. Then I used my hand-held steamer to go over him thoroughly with nice hot shots of steam, which also serves to reblock him where he had started to sag. (Wish that worked on me!)

As soon as I can dig up the remainders of the yarn I used (a feat of archaeology in itself!), I will repair the little holes and he will be ready to return to his place of honor.

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 19 other followers

%d bloggers like this: